This is an implementation of a Weather Station Module that I have been designing for the PIC. But is intended now for implementing onto the SX Ethernet Board.
The Station is designed to include Wind-speed and Direction, A Temperature sensor, a Barometric-pressure sensor, a Humidity sensor, and a Rain-guage sensor. It is intended to be built as a portable module to link up to an Ethernet cable and place on the porch (for example). This would give the User a quick reference to outside weather conditions (via an indoor PC), and allow the User to upload (to a File, Database, etc) continuous Weather Data throughout the Day/Month/Year/etc. The User could then project Daily/Seasonal/Annual/etc Graphs for his/her local Weather.
This design has not been tested yet. It still needs to be calibrated for times/values/etc.It should be shield grounded. And, the Ethernet link should probably be connected via an Isolator/Adapter.
| file: /Techref/scenix/contest/wthsta/index.htm, 1KB, , updated: 2002/5/1 17:43, local time: 2024/11/26 22:08,
18.226.93.138:LOG IN
|
| ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://ecomorder.com/techref/scenix/contest/wthsta/index.htm"> Ethernet Weather Station</A> |
| Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to ecomorder.com! |
.