ENC2a: AS5134 High Speed Magnetic Encoder. massmind

Based on the amazing AS5134 chip, this encoder senses the position of a two pole radially magnetized disk over a full revolution using a hall effect sensor array. The sensor signal changes are converted to a digital quadrature signal, and the position information stored as absolute position data on some registers, which are readable through a 3 wire synchronous serial interface. Standard quadrature Index, A and B phase signals are also generated just like any standard encoder.

Features

360 CPR, 76,875 RPM
Non-contact magnetic sensor.
- No need to mechanically attach to a shaft, just epoxy a small magnet in place.
- Alignment isn`t critical. As long as the magnetic field is generally over the chip, within 1/2 inch, it will work quite well
The onboard LED indicates that the board is powered, and provides easy testing the alignment of the IC with respect to the magnet.
Multiple connection / cable options are supported.
Standard Quadrature A and B phase outputs, as well as several digital modes.

For more information, see the WebPage.

level: easy.

You may also be interested in:
416083 ENC2b: High Resolution Motor Encoder:
416079 PID Controller for Servo system: