Wagner Lipnharski says:
A ringing detection, and audio coupling circuit can be done easily: When
a ring comes, the AC signal 60V 20Hz feeds the opto-coupler LED and the -RING
signal goes to ground, the microcontroller senses it and drives the relay
that closes and connects the 600 Ohms phone transformer to the line. For
most applications, the ringing sensing circuit (capacitor, zeners, ...) does
not interfere so much in the common phone line usage for voice or data, if
still connected in parallel. If you want, you can use a SPDT relay and switch
the phone line *from* the ringing sensing circuit to the phone transformer,
but it is not strictly necessary. Of course there are circuits that can do
all of the below easily, but as usual, at cost of more dollars.
phone line
o---------o--------------------o o-------------.
| ------ | .----->
--- 0.22µFx250V relay | |
--- 0.47µFx250V 'S | S'
| 600 Ohms S | S 600 Ohms
| S | S
V Zener 22V .S | S.
--- | |
| | '----->
--- o +5V |
A Zener 22V | |
| | |
| R 10 kOhms |
2 kOhms R R |
R | |
| opto coupler | |
o-------. 4N35 .-------o----> |
| | | -RING |
--- V __--> |/ |
1N4007 A --- |\e-. |
| | | |
o-------' | |
| GND |
| |
o---------o---------------------------------------'
phone line
| file: /Techref/pots/interface.htm, 2KB, , updated: 2001/10/13 00:57, local time: 2025/10/25 14:54,
216.73.216.188,10-3-157-36:LOG IN
|
| ©2025 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://ecomorder.com/techref/pots/interface.htm"> pots interface</A> |
| Did you find what you needed? |
Welcome to ecomorder.com! |
|
The Backwoods Guide to Computer Lingo |
.