Read, Program and Debug the SXKEY using a QBASIC-program (QBL99V3.BAS)

• Create a program with SXKEY28L.exe and fill a SX28 with "Program" (your prototype)
• Start the QBASIC-program (set the COMport on 1 or 2 in the second line!!) and give as command: <R> (READ)
• In the DOS-directory you will find now the files:
  • READ_KEY.TXT (with the content of the SX28 in readable form) You can rename that file and use this name for programming SX28 -chips in the field.
  • DISDEBM.TXT (disassembled content of SX28 ). (Also the still "unknown" DEBUG-codes)
• Program a new SX28 -chip with the command: <P> (Program)
• You can write your own VERIFY-command in QBASIC if you like.

If you like to use the DEBUG-facility:

• Fill the SX28 -chip with the DEBUG-command in SXKEY28L.exe and QUIT
• In the QBASIC-program start with <R> (READ) and then <D> (DEBUG)

* The ESC-key give you the possible commands.

Nb: look in the file DISDEBM.TXT to see what particular debug-code the program: SXKEY28L.exe has created.

Code:

• @spam@eg_allenSTOPspam at TakeThisOuThotmail.oom shares this code:

  Scenix SX-based microcontrollers Debug Mode & OpCodes
  
  
  SASM [options] file[.asm]
  
  
  Opt Arguments                            Description           Default
  --- ----------------------------------   ------------------    -------
  
  /C  DEBUGGER                             Debug Mode		OFF
  
  
  
  HexBytes	[<Operand>]	[<Comment>]
  
  $044		DEBUG
  $045		OSC2RW
  $046		SETBP
  $047		FIFO
  $048		PUSH_00
  $049		PUSH_01
  $04A		PUSH_10
  $04B		PUSH_11
  $04C		POP_00
  $04D		POP_01
  $04E		POP_10
  $04F		POP_11
  
  
  

  +

  .