The LOGFONT structure defines the attributes of a font.
typedef struct tagLOGFONT { // lf LONG lfHeight; LONG lfWidth; LONG lfEscapement; LONG lfOrientation; LONG lfWeight; BYTE lfItalic; BYTE lfUnderline; BYTE lfStrikeOut; BYTE lfCharSet; BYTE lfOutPrecision; BYTE lfClipPrecision; BYTE lfQuality; BYTE lfPitchAndFamily; TCHAR lfFaceName[LF_FACESIZE]; } LOGFONT;
Value |
Meaning |
> 0 |
The font mapper transforms this value into device units and matches it against the cell height of the available fonts. |
0 |
The font mapper uses a default height value when it searches for a match. |
< 0 |
The font mapper transforms this value into device units and matches its absolute value against the character height of the available fonts. |
For all height comparisons, the font mapper looks for the largest font that does not exceed the requested size.
This mapping occurs when the font is used for the first time.
For the MM_TEXT mapping mode, you can use the following formula to specify a height for a font with a given point size:
lfHeight = -MulDiv(PointSize, GetDeviceCaps(hDC, LOGPIXELSY), 72);
When the graphics mode is set to GM_COMPATIBLE, lfEscapement specifies
both the escapement and orientation. You should set lfEscapement and lfOrientation
to the same value.
The following values are defined for convenience:
Value |
Weight |
FW_DONTCARE |
0 |
FW_THIN |
100 |
FW_EXTRALIGHT |
200 |
FW_ULTRALIGHT |
200 |
FW_LIGHT |
300 |
FW_NORMAL |
400 |
FW_REGULAR |
400 |
FW_MEDIUM |
500 |
FW_SEMIBOLD |
600 |
FW_DEMIBOLD |
600 |
FW_BOLD |
700 |
FW_EXTRABOLD |
800 |
FW_ULTRABOLD |
800 |
FW_HEAVY |
900 |
FW_BLACK |
900 |
ANSI_CHARSET
DEFAULT_CHARSET
SYMBOL_CHARSET
SHIFTJIS_CHARSET
GB2312_CHARSET
HANGEUL_CHARSET
CHINESEBIG5_CHARSET
OEM_CHARSET
The OEM_CHARSET value specifies a character set that is operating-system dependent.
You can use the DEFAULT_CHARSET value to allow the name and size of a font to fully describe the logical font. If the specified font name does not exist, a font from any character set can be substituted for the specified font, so you should use DEFAULT_CHARSET sparingly to avoid unexpected results.
Fonts with other character sets may exist in the operating system. If an application uses a font with an unknown character set, it should not attempt to translate or interpret strings that are rendered with that font.
This parameter is important in the font mapping process. To ensure consistent
results, specify a specific character set. If you specify a typeface name in
the lfFaceName member, make sure that the lfCharSet value
matches the character set of the typeface specified in lfFaceName.
Value |
Meaning |
OUT_CHARACTER_PRECIS |
Not used. |
OUT_DEFAULT_PRECIS |
Specifies the default font mapper behavior. |
OUT_DEVICE_PRECIS |
Instructs the font mapper to choose a Device font when the system contains multiple fonts with the same name. |
OUT_OUTLINE_PRECIS |
Windows NT: This value instructs the font mapper to choose from TrueType and other outline-based fonts. Windows 95: This value is not used. |
OUT_RASTER_PRECIS |
Instructs the font mapper to choose a raster font when the system contains multiple fonts with the same name. |
OUT_STRING_PRECIS |
This value is not used by the font mapper, but it is returned when raster fonts are enumerated. |
OUT_STROKE_PRECIS |
Windows NT: This value is not used by the font mapper, but it is returned when TrueType, other outline-based fonts, and vector fonts are enumerated. Windows 95: This value is used to map vector fonts, and is returned when TrueType or vector fonts are enumerated. |
OUT_TT_ONLY_PRECIS |
Instructs the font mapper to choose from only TrueType fonts. If there are no TrueType fonts installed in the system, the font mapper returns to default behavior. |
OUT_TT_PRECIS |
Instructs the font mapper to choose a TrueType font when the system contains multiple fonts with the same name. |
Applications can use the OUT_DEVICE_PRECIS, OUT_RASTER_PRECIS, and
OUT_TT_PRECIS values to control how the font mapper chooses a font when the
operating system contains more than one font with a given name. For example,
if an operating system contains a font named Symbol in raster and TrueType
form, specifying OUT_TT_PRECIS forces the font mapper to choose the TrueType
version. Specifying OUT_TT_ONLY_PRECIS forces the font mapper to choose a
TrueType font, even if it must substitute a TrueType font of another name.
Value |
Meaning |
CLIP_DEFAULT_PRECIS |
Specifies default clipping behavior. |
CLIP_CHARACTER_PRECIS |
Not used. |
CLIP_STROKE_PRECIS |
Not used by the font mapper, but is returned when raster, vector, or TrueType fonts are enumerated. Windows NT: For compatibility, this value is always returned when enumerating fonts. |
CLIP_MASK |
Not used. |
CLIP_EMBEDDED |
You must specify this flag to use an embedded read-only font. |
CLIP_LH_ANGLES |
When this value is used, the rotation for all fonts depends on whether the orientation of the coordinate system is left-handed or right-handed. If not used, device fonts always rotate counterclockwise, but the rotation of other fonts is dependent on the orientation of the coordinate system. For more information about the orientation of coordinate systems, see the description of the nOrientation parameter |
CLIP_TT_ALWAYS |
Not used. |
Value |
Meaning |
DEFAULT_QUALITY |
Appearance of the font does not matter. |
DRAFT_QUALITY |
Appearance of the font is less important than when PROOF_QUALITY is used. For GDI raster fonts, scaling is enabled, which means that more font sizes are available, but the quality may be lower. Bold, italic, underline, and strikeout fonts are synthesized if necessary. |
PROOF_QUALITY |
Character quality of the font is more important than exact matching of the logical-font attributes. For GDI raster fonts, scaling is disabled and the font closest in size is chosen. Although the chosen font size may not be mapped exactly when PROOF_QUALITY is used, the quality of the font is high and there is no distortion of appearance. Bold, italic, underline, and strikeout fonts are synthesized if necessary. |
DEFAULT_PITCH
FIXED_PITCH
VARIABLE_PITCH
Bits 4 through 7 of the member specify the font family and can be one of the following values:
FF_DECORATIVE
FF_DONTCARE
FF_MODERN
FF_ROMAN
FF_SCRIPT
FF_SWISS
The proper value can be obtained by using the Boolean OR operator to join one pitch constant with one family constant.
Font families describe the look of a font in a general way. They are intended for specifying fonts when the exact typeface desired is not available. The values for font families are as follows:
Value |
Meaning |
FF_DECORATIVE |
Novelty fonts. Old English is an example. |
FF_DONTCARE |
Don’t care or don’t know. |
FF_MODERN |
Fonts with constant stroke width (monospace), with or without serifs. Monospace fonts are usually modern. Pica, Elite, and CourierNew® are examples. |
FF_ROMAN |
Fonts with variable stroke width (proportional) and with serifs. MS® Serif is an example. |
FF_SCRIPT |
Fonts designed to look like handwriting. Script and Cursive are examples. |
FF_SWISS |
Fonts with variable stroke width (proportional) and without serifs. MS® Sans Serif is an example. |
CreateFont, CreateFontIndirect, EnumFontFamilies
file: /Techref/os/win/api/win32/struc/src/str10_7.htm, 19KB, , updated: 2000/4/7 11:20, local time: 2024/12/25 10:28,
18.226.28.97:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://ecomorder.com/techref/os/win/api/win32/struc/src/str10_7.htm"> LOGFONT</A> |
Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to ecomorder.com! |
.