Linux Command line Serial Communications

Code:

//from the command line, set a USB serial adapter, then interact, ctrl-c to exit
stty -F /dev/ttyUSB0 ospeed 57600 ispeed 57600 raw
cat /dev/ttyUSB0 & cat > /dev/ttyUSB0

//from the command line, set a USB serial adapter and send and receive data
stty -F /dev/ttyUSB0 ospeed 57600 ispeed 57600 raw
echo -ne '?' > /dev/ttyUSB0
cat -v < /dev/ttyUSB0

file: /Techref/os/linux/serialcmds.htm, 0KB, , updated: 2017/9/27 10:37, local time: 2024/12/17 19:23, owner: JMN-EFP-786,

^{18.220.63.250:LOG IN}

©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?

Please DO link to this page! Digg it! / MAKE!

<A HREF="http://ecomorder.com/techref/os/linux/serialcmds.htm"> Linux Command line Serial Communications</A>

Did you find what you needed?

Linux Command line Serial Communications

Welcome to ecomorder.com!

Welcome to ecomorder.com!