-- next: about
Updated 2003-08-07
contents:
Altium http://www.altium.com/ sells the Protel CAD system http://www.protel.com/ | http://www.altium.com/products/protel.htm (schematic design, PWB layout, circuit simulation, FPGA design, autorouter, etc.) for US$ 7 995.00 (as of 2003-08-07)
related local files:
The Protel Users FAQ was first posted by David Cary on 2000-04-03. -- David Cary
end Protel Users FAQ http://massmind.org/techref/app/protel.htm /* was http://groups.yahoo.com/group/protel-users/files/protelfaq.html */ /* was http://www.egroups.com/files/protel-users/protelfaq.html */
See also:
https://workspace.circuitmaker.com/ Circuit Maker is basically Altium which is the next version of Protel, but with open source license and requirements.+
Note: The board shape as defined with the board shape tool does not automatically translate to primitives on a Gerber layer. Instead, the board shape can be exported as NC drill file (for contour routing) if you enable this option in the NC Drill export dialog. If you want to have a Gerber file with the board shape on it, simply activate an empty mechanical layer (shortcut: Ctrl + L), and rename it to BoardOutline (or something similar). To rename a layer, click on it once. Then, using the Board Shape tool, choose Create Primitives from Board Shape, and place them on the newly created mechanical layer. If you tick this layer when exporting Gerbers, you'll get another Gerber file named BoardOutline with only the board shape on it.
end http://massmind.org/techref/app/protel.htm
Questions:
file: /Techref/app/protel.htm, 7KB, , updated: 2018/12/9 21:55, local time: 2024/11/21 05:46,
owner: DAV-MP-E62a,
3.17.154.144:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://ecomorder.com/techref/app/protel.htm"> independent Protel users FAQ </A> |
Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to ecomorder.com! |
.