please dont rip this site

Electronic-Forms Installation

for

Hilton Brand Hotel OnQ v2 or v5

As of 2004.02.03
The latest version of this document will be found at:
http://www.efplus.com/techref/app/pms/system21/cd210/index.htm

Installation Overview

Electronic forms are delivered on a SmartBOX or "chips" that hold the forms image for folios, receipts, registration key-packets etc... Before integrating electronic forms, you must order, approve, receive and install the eForms device containing the image of your forms into each of your laser printers. Printed installation instructions should be included with your eForms device.

Integration of e-Forms is accomplished in 3 easy steps:

  1. Verify an e-Forms capable printer driver and install if necessary.
    Quick start:
  2. Install the e-Forms fonts.
    Quick start:
  3. Configure OnQ
    Quick start:

    (these steps are repeated at each workstation where e-Forms will be printed)

Typical installation will require about 60 minutes for the average property. The first workstation will probably take 30 minutes, the next; 15 and so on until you find you are able to do any workstation in about 5 minutes.

Next: Pre-installation review and setup


file: /Techref/app/pms/system21/cd210/index.htm, 4KB, , updated: 2005/11/9 15:18, local time: 2024/12/22 18:36, owner: JMN-EFP-786,
TOP NEW HELP FIND: 
18.118.120.13:LOG IN

 ©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions?
Please DO link to this page! Digg it! / MAKE!

<A HREF="http://ecomorder.com/techref/app/pms/system21/cd210/index.htm"> e-Forms installation for Hilton brand hotels OnQ Users</A>

After you find an appropriate page, you are invited to your to this massmind site! (posts will be visible only to you before review) Just type a nice message (short messages are blocked as spam) in the box and press the Post button. (HTML welcomed, but not the <A tag: Instead, use the link box to link to another page. A tutorial is available Members can login to post directly, become page editors, and be credited for their posts.


Link? Put it here: 
if you want a response, please enter your email address: 
Attn spammers: All posts are reviewed before being made visible to anyone other than the poster.
Did you find what you needed?

 

Welcome to ecomorder.com!

 

Welcome to ecomorder.com!

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  .