Interrupt 0Ah EGA Vertical Retrace(0:0028h) (IRQ2) used by EGA vertical retrace, hard disk
note 1) On the Tandy 1000, this interrupt is used by the hard disk
2) The TOPS and PCnet adapters use this interrupt request line by default
(internal) invalid task state segment (80286 protected-mode)
file: /Techref/INT/0A.htm, 0KB, , updated: 1999/2/20 10:27, local time: 2024/11/12 11:35,
3.144.243.80:LOG IN ©2024 PLEASE DON'T RIP! THIS SITE CLOSES OCT 28, 2024 SO LONG AND THANKS FOR ALL THE FISH!
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://ecomorder.com/techref/INT/0A.htm"> INT 0A</A> |
Did you find what you needed? |
Welcome to ecomorder.com! |
Ashley Roll has put together a really nice little unit here. Leave off the MAX232 and keep these handy for the few times you need true RS232! |
.