See:
Also:
See also:
Richard Ottosen has developed a version of the Digital Frequency Synthesizer described in Tom Napier's article "Digital Frequency Synthesis" in issue 99 (October 1998) of Circuit Cellar INK (http://www.edtn.com/embapps/emba057.htm). The frequency is set by a serial input and can varied from less than 1Hz to over 500KHz.
Richard Ottosen has developed an improved version of the Digital Frequency Synthesizer described in Tom Napier's article "Digital Frequency Synthesis" in issue 99 (October 1998) of Circuit Cellar INK (http://www.edtn.com/embapps/emba057.htm). It uses direct digital synthesis (DDS) to generate sine, triangle and square waveforms. The frequency, waveform and amplitude are all set numerically. The frequency can be varied from less than 1Hz to over 500KHz. The amplitude can be a few millivolts to a few volts.
file: /Techref/scenix/lib/io/osi1/dfs/index.htm, 3KB, , updated: 2007/7/31 15:44, local time: 2024/11/22 18:24,
18.223.213.76:LOG IN
|
©2024 These pages are served without commercial sponsorship. (No popup ads, etc...).Bandwidth abuse increases hosting cost forcing sponsorship or shutdown. This server aggressively defends against automated copying for any reason including offline viewing, duplication, etc... Please respect this requirement and DO NOT RIP THIS SITE. Questions? <A HREF="http://ecomorder.com/Techref/scenix/lib/io/osi1/dfs/index.htm"> Digital Frequency Synthesis</A> |
Did you find what you needed? |
Welcome to ecomorder.com! |
Welcome to ecomorder.com! |
.