EnumPrinterData info  Overview  Group

The EnumPrinterData function enumerates configuration data for a specified printer.

A printer’s configuration data consists of a set of named and typed values. The EnumPrinterData function obtains one of these values, and its name and a type code, each time you call it. Call the EnumPrinterData function several times in succession to obtain all of a printer’s configuration data values.

Printer configuration data is stored in the registry. While enumerating printer configuration data, you should avoid calling registry functions that might change that data.

DWORD EnumPrinterData(

Parameters

hPrinter

Handle to the printer whose configuration data is to be obtained.

You obtain this printer handle by calling the OpenPrinter function.

dwIndex

An index value that specifies the configuration data value to retrieve.

Set this parameter to zero for the first call to EnumPrinterData for a given printer handle. Then increment the parameter by one for subsequent calls involving the same printer, until the function returns ERROR_NO_MORE_ITEMS. See the following Remarks section for further information.

Note: If you use the technique mentioned in the descriptions of the cbValueName and cbData parameters to obtain adequate buffer size values, setting both those parameters to zero in a first call to EnumPrinterData for a given printer handle, the value of dwIndex does not matter for that call. Set dwIndex to zero in the next call to EnumPrinterData to start the actual enumeration process.

Configuration data values are not ordered. New values will have an arbitrary index. This means that the EnumPrinterData function may return values in any order.

pValueName

Pointer to a buffer that receives the name of the configuration data value, including a terminating null character.

cbValueName

Specifies the size, in bytes, of the buffer pointed to by pValueName.

If you want to have the operating system supply an adequate buffer size, set both this parameter and the cbData parameter to zero for the first call to EnumPrinterData for a given printer handle. When the function returns, the variable pointed to by pcbValueName will contain a buffer size that is large enough to successfully enumerate all of the printer’s configuration data value names.

pcbValueName

Pointer to a variable that receives the number of bytes stored into the buffer pointed to by pValueName.

pType

Pointer to a variable that receives a type code for the value specified by dwIndex. The type code can be one of the following values:

Value	Meaning
REG_BINARY	Binary data in any form.
REG_DWORD	A 32-bit number.
REG_DWORD_LITTLE_ENDIAN	A 32-bit number in little-endian format. This is equivalent to REG_DWORD. In little-endian format, a multi-byte value is stored in memory from the lowest byte (the “little end”) to the highest byte. For example, the value 0x12345678 is stored as (0x78 0x56 0x34 0x12) in little-endian format. Windows NT and Windows 95 are designed to run on little-endian computer architectures. A user may connect to computers that have big-endian architectures, such as some UNIX systems.
REG_DWORD_BIG_ENDIAN	A 32-bit number in big-endian format. In big-endian format, a multi-byte value is stored in memory from the highest byte (the “big end”) to the lowest byte. For example, the value 0x12345678 is stored as (0x12 0x34 0x56 0x78) in big-endian format. Windows NT and Windows 95 are designed to run on little-endian computer architectures. A user may connect to computers that have big-endian architectures, such as some UNIX systems.
REG_EXPAND_SZ	A null-terminated string that contains unexpanded references to environment variables (for example, “%PATH%”). It will be a Unicode or ANSI string depending on whether you use the Unicode or ANSI functions.
REG_LINK	A Unicode symbolic link.
REG_MULTI_SZ	An array of null-terminated strings, terminated by two null characters.
REG_NONE	No defined value type.
REG_RESOURCE_LIST	A device-driver resource list.
REG_SZ	A null-terminated string. It will be a Unicode or ANSI string, depending on whether you use the Unicode or ANSI functions.

The pType parameter can be NULL if the type code is not required.

pData

Pointer to a buffer that receives the configuration data value.

This parameter can be NULL if the configuration data value is not required.

cbData

Specifies the size, in bytes, of the buffer pointed to by pData.

If you want to have the operating system supply an adequate buffer size, set both this parameter and the cbValueName parameter to zero for the first call to EnumPrinterData for a given printer handle. When the function returns, the variable pointed to by pcbData will contain a buffer size that is large enough to successfully enumerate all of the printer’s configuration data value names.

pcbData

Pointer to a variable that receives the number of bytes stored into the buffer pointed to by pData.

This parameter can be NULL if pData is NULL.

Return Values

If the function succeeds, the return value is ERROR_SUCCESS.

If the function fails, the return value is a Win32 error value.

The function returns ERROR_NO_MORE_ITEMS when there are no more configuration data values to retrieve for a given printer handle.

Remarks

EnumPrinterData retrieves printer configuration data set by the SetPrinterData function.

If you want to have the operating system supply an adequate buffer size, first call EnumPrinterData with both the cbValueName and cbData parameters set to zero, as noted earlier in the Parameters section. The value of dwIndex does not matter for this call. When the function returns, *pcbValueName and *pcbData will contain buffer sizes that are large enough to enumerate all of the printer’s configuration data value names and values. On the next call, allocate value name and data buffers, set cbValueName and cbData to the sizes in bytes of the allocated buffers, and set dwIndex to zero. Thereafter, continue to call the EnumPrinterData function, incrementing dwIndex by one each time, until the function returns ERROR_NO_MORE_ITEMS.

See Also

DeletePrinterData, GetPrinterData, OpenPrinter, SetPrinter, SetPrinterData 

  .